Order Products : sales@su-jiao.com
RTP 2205 HF UP
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NbDVM8_RTP-2205-HF-UP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
"Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade." |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.52 | g/cm³ | ISO 1183 |
| Moisture Content | 0.10 | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Primary Additive | 30 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 12500 | MPa | ISO 527-2 |
| Tensile Stress | 195 | MPa | ISO 527-2 |
| Tensile Strain (Yield, Injection Molded) | 2.6 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 11000 | MPa | ISO 178 |
| Flexural Stress (Injection Molded) | 300 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 1(Injection Molded) | 10 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength 2(Injection Molded) | 60 | kJ/m² | ISO 180/1U |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Data listed is for natural or black colored materials. Pigments can affect properties.Desiccant Type Dryer Required. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 150 | °C | |
| Drying Time - Desiccant Dryer | 3.0 | hr | |
| Dew Point | -30.0 | °C | |
| Processing (Melt) Temp | 350 - 400 | °C | |
| Mold Temperature | 160 - 220 | °C | |
| Injection Pressure | 80.0 - 125 | MPa |
| Note Message | |
|---|---|
| 1 . | 4mm thickness |
| 2 . | 4mm thickness |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VESTAKEEP® 4000 FC30 | Evonik Industries AG | PEEK | VESTAKEEP® |
| Mylar® EB-11 (300 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| Americas Styrenics EC6600 | Americas Styrenics LLC | PS (HIPS) | Americas Styrenics |
| ENGAGE™ 8003 EL | The Dow Chemical Company | TPO (POE) | ENGAGE™ |
| Latiohm 57-05 PD01 G/15 | LATI S.p.A. | PPA | Latiohm |
