Order Products : sales@su-jiao.com
APEX® RM 9214
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | Teknor Apex Company |
| Trademark: | APEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NaS75X_APEX-RM-9214.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| APEX®RM 9214 is a rigid polyvinyl chloride material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific,. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.38 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 10 sec) | 81 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2480 | MPa | ASTM D638 |
| Tensile Strength (Break) | 42.1 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 120 | % | ASTM D638 |
| Flexural Modulus 2 | 2550 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| 0°C, 3.18mm, injection molding | 350 | J/m | ASTM D256 |
| 23°C, 3.18mm, molded | 750 | J/m | ASTM D256 |
| Additional Information |
|---|
| Deflection Temp Under Load: Pending264 psi, Annealed 0.250" |
| Note Message | |
|---|---|
| 1 . | 5.1 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4005 FR A HS | RTP Company | PPA | RTP |
| Shin-Etsu Elastomer SV-18000U | Shin-Etsu Silicones of America | Silicone Rubber, HTV | Shin-Etsu Elastomer |
| VITAMIDE® BY12BK6350 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| BioSpan® SPU | DSM Biomedical Inc. | PUR, Unspecified | BioSpan® |
| LUVOCOM® 1100/GF/20/EM/MR | Lehmann & Voss & Co. | PESU | LUVOCOM® |
