Order Products : sales@su-jiao.com
Stirol UPS-1002 L
| Category: | PS (HIPS) , High Impact Polystyrene |
| Manufacturer: | JSC CONCERN STIROL |
| Trademark: | Stirol |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NZGb1i_Stirol-UPS-1002-L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| UPS-1002 is for manufacturing electrotechnical, radio engineering articles, requiring increased stress-strain properties. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) 1 | 2.4 to 3.6 | g/10 min | ISO 1133 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | < 0.10 | % | ISO 62 |
| Bound Styrene | < 0.1 | % | |
| Purity 2 | 20.0 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | > 24.5 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 35 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | > 10 | kJ/m² | ISO 179 |
| Note Message | |
|---|---|
| 1 . | ±10% |
| 2 . | Disc surface should be clean. It is allowed one insertion with diameter 0,2-0,3 mm at the surfaces of disks converting to area, cm² |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| STYRON A-TECH™ 1180 | Trinseo | PS (HIPS) | STYRON A-TECH™ |
| Titanvene™ LL0209SR | PT. TITAN Petrokimia Nusantara | LLDPE | Titanvene™ |
| NOVAPOL® PF-0118 Series | NOVA Chemicals | LLDPE | NOVAPOL® |
| ALCOM® POM 770/1 PTFE1,5 | ALBIS PLASTIC GmbH | Acetal (POM) Copolymer | ALCOM® POM |
| OTECH TPO OTE6519 - Cord Insulation | OTECH Corporation | TPO | OTECH TPO |
