Order Products : sales@su-jiao.com
LCA® 100P Type
| Category: | Acetal (POM) Homopolymer , Acetal (POM) Homopolymer |
| Manufacturer: | UniPlas, Inc. |
| Trademark: | LCA® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NX47vt_LCA-100P-Type.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LCA® 100P Type is an Acetal (POM) Homopolymer material. It is available in North America for injection molding. Primary attribute of LCA® 100P Type: Homopolymer. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/1.05 kg) | 1.0 to 4.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 70.3 | MPa | |
| Break | 65.5 | MPa | |
| Tensile Elongation (Break) | 77 | % | ASTM D638 |
| Flexural Modulus | 2760 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 89.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 130 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 176 | °C | ASTM D789 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SHIN-A SE-320P | SHIN-A T&C | Epoxy | SHIN-A |
| TAROPRENE® 1 A35 E1N | Taro Plast S.p.A. | TPV | TAROPRENE® |
| EverGlide® MB3950 | Polymer Dynamix | EVA | EverGlide® |
| OTECH ALLOY OM5830-Boot | OTECH Corporation | TP, Unspecified | OTECH ALLOY |
| Zytel® ST811HS NC010 | DuPont Performance Polymers | Nylon 6 | Zytel® |
