Order Products : sales@su-jiao.com

3M™ Dyneon™ TFM™ Modified PTFE TFMR 1602

Category:	PTFE , Polytetrafluoroethylene
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ TFM™ Modified PTFE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	NWlQpP_3MDyneonTFMModifiedPTFETFMR1602.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Modified suspension PTFE especially designed for ram extrusion of thick walled pipes and rods.

Special Features

Meets ASTM D4894 - Type VI classification

Produced by suspension polymerisation

Tailor made for ram extrusion

Excellent free-flowing and feeding properties

Good mouldability

Reduced deformation under load (cold flow)

Higher transparency

Smoother surfaces on machined parts

Less porosity and reduced permeability

Better compression stress relaxation

Improved weldability

Chemical inertness

Low friction behaviour

Good flame retardance

Exceptional temperature resistance

General Information
Features	Low friction coefficient Weldable Good formability Good liquidity Definition, high Flame retardancy
Uses	Bar Valve/valve components Piping system Pipe fittings Seals Profile
Appearance	Clear/transparent
Forms	Powder Particles Cohesion
Processing Method	Plunger press-out

Physical	Nominal Value	Unit	Test Method
Density	2.16	g/cm³	ISO 12086
Apparent Density	0.80	g/cm³	ISO 60
Molding Shrinkage	11	%	Internal method
Average Particle Size	800	µm	ISO 13320

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	53		ISO 868

Mechanical	Nominal Value	Unit	Test Method
Deformation Under Load			ASTM D621
23°C, 15 MPa ¹	14.0	%	ASTM D621
23°C, 15 MPa ²	6.00	%	ASTM D621

Films	Nominal Value	Unit	Test Method
Tensile Strength (500 µm)	35.0	MPa	ISO 12086
Tensile Elongation (Break, 500 µm)	500	%	ISO 12086

Thermal	Nominal Value	Unit	Test Method
Thermal Conductivity	0.22	W/m/K	DIN 52612

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.0E+17	ohms	IEC 60093
Volume Resistivity	1.0E+18	ohms·cm	IEC 60093

Note Message
1 .	100 h
2 .	remaining

Resin Grade	Manufacturer	Category	Trademark
Network Polymers Nylon 6604 HS	Network Polymers, Inc.	Nylon 66	Network Polymers Nylon
Elastron® D D101.A72.N	Elastron USA, Inc.	SBS	Elastron® D
LG PMMA HP210	LG MMA Corp.	Acrylic (PMMA)	LG PMMA
LNP™ THERMOCOMP™ DX11354 compound	SABIC Innovative Plastics Asia Pacific	PC	LNP™ THERMOCOMP™
Sylvin 8385-70DUV Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin