Order Products : sales@su-jiao.com
neogol® 55 P UG
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | API SpA |
| Trademark: | neogol® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NUQ4Pr_neogol55PUG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
neogol®55 P UG is a polyolefin thermoplastic elastomer (TPO (POE)) product,. It can be processed by co-extrusion molding or injection molding and is available in Europe. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.860 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 150 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| -- | 4.90 | MPa | ASTM D638 |
| 100% strain | 1.70 | MPa | ASTM D638 |
| 300% strain | 2.40 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 950 | % | ASTM D638 |
| Abrasion Resistance | 245 | mm³ | DIN 53516 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1 | 29.0 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 23°C, 72 hr | 30 | % | ASTM D395 |
| 70°C, 22 hr | 61 | % | ASTM D395 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 155 - 175 | °C | |
| Middle Temperature | 160 - 180 | °C | |
| Front Temperature | 160 - 180 | °C | |
| Nozzle Temperature | 165 - 190 | °C | |
| Mold Temperature | 25 - 40 | °C | |
| Injection Rate | Moderate-Fast |
| Note Message | |
|---|---|
| 1 . | With Notch |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 6415-70 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| ADDINYL C2 ZV20 | ADDIPLAST | Nylon 66/6 | ADDINYL |
| Eltex® PF6612KJ | INEOS Olefins & Polymers Europe | mLLDPE | Eltex® |
| PLUSTEK PA325G6 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
| KMI PA KM66-01MC | KMI Group, Inc. | Nylon 66 | KMI PA |
