Order Products : sales@su-jiao.com
Jam PE 526F2
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Jam Petrochemical Company |
| Trademark: | Jam PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NThxoG_Jam-PE-526F2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jam PE 526F2 is a High Density Polyethylene product. It can be processed by blow molding and is available in Africa & Middle East. Typical application: Containers. Primary characteristic: high escr (stress crack resistant). |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.25 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | 50.0 | hr | |
| Flow Rate Ratio | > 90.0 | ASTM D1238 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Titanium | 3 | ppm |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 27.0 | MPa | |
| Break, Compression Molded | 32.0 | MPa | |
| Tensile Elongation (Break, Compression Molded) | 850 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 1250 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 150 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 127 | °C | ASTM D1525 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Yellowness Index | 0.0 | YI | ASTM D1925 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moharamplast HDPE MP-COAT 5205 | Moharamplast S.A.E | HDPE | Moharamplast HDPE |
| ENVIROLOY® ENV15-NC380 | ENVIROPLAS®, Inc. | PC+ABS | ENVIROLOY® |
| Petlon Prime A1-00-00-BK | Petlon Polymers Ltd | Nylon 66 | Petlon Prime |
| Moplen HP622J | LyondellBasell Industries | PP Homopolymer | Moplen |
| SABIC® PC PC1803R resin | SABIC Innovative Plastics Asia Pacific | PC | SABIC® PC |
