Order Products : sales@su-jiao.com
Sultron® R10
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | Asia International Enterprise (Hong Kong) Limited |
| Trademark: | Sultron® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NRaBUg_Sultron-R10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Sultron®R10 is a polyphenylene sulfide (PPS) material, and the filler is 10% glass fiber reinforced material. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is injection molding. Sultron®The main features of R10 are:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.31 | g/cm³ | ISO 1183 |
| Molding Shrinkage | 0.90 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 110 | MPa | ISO 527-2 |
| Flexural Modulus | 9500 | MPa | ISO 178 |
| Flexural Stress | 160 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 15 | kJ/m² | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 265 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 245 | °C | ISO 75-2/A |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (0.800 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 - 140 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 310 - 320 | °C | |
| Middle Temperature | 320 - 340 | °C | |
| Front Temperature | 330 - 340 | °C | |
| Nozzle Temperature | 290 - 300 | °C | |
| Mold Temperature | 80.0 - 150 | °C | |
| Injection Pressure | 30.0 - 120 | MPa | |
| Holding Pressure | 40.0 - 50.0 | MPa | |
| Back Pressure | 5.00 - 10.0 | MPa | |
| Screw Speed | 40 - 80 | rpm |
| Injection instructions |
|---|
| Cylinder Temperature 4: 290 to 310°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® HDPE F4520 | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® HDPE |
| Shandong PA1212 GYBMVN | Shandong Guangyin New Materials Co., Ltd. | Nylon 1212 | Shandong PA1212 |
| DOW™ HDPE GRSN-6001 NT | The Dow Chemical Company | HDPE | DOW™ HDPE |
| NuSil MED20-2955 | NuSil Technology | Silicone Rubber, LSR | NuSil |
| Daelim Po1y® PP-185 | DAELIM INDUSTRIAL CO., LTD. | PP Homopolymer | Daelim Po1y® |
