Order Products : sales@su-jiao.com
Bergamid™ AB700 UF SO
| Category: | Nylon 66/6 , Polyamide 66/6 Copolymer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Bergamid™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NRPDHw_Bergamid-AB700-UF-SO.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Bergamid™ AB700 UF SO is a Polyamide 66/6 Copolymer (Nylon 66/6) product. It is available in Africa & Middle East, Asia Pacific, or Europe. Characteristics include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 1.20 | g/cm³ | DIN 53479 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 4000 | MPa | ISO 527-2/1 |
| Tensile Stress (Break, 23°C) | 75.0 | MPa | ISO 527-2/5 |
| Tensile Strain (Break, 23°C) | 5.5 | % | ISO 527-2/5 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C | 2.4 | kJ/m² | |
| 23°C | 3.0 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179 | ||
| -30°C | 64 | kJ/m² | |
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 190 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 80.0 | °C | ISO 75-2/A |
| Maximum Use Temperature | IEC 60216 | ||
| -- 2 | 115 | °C | |
| Short Time | 200 | °C | |
| Melting Temperature (DSC) | 243 | °C | ISO 3146 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+10 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+12 | ohms·cm | IEC 60093 |
| Electric Strength | 45 | kV/mm | IEC 60243-1 |
| Dissipation Factor (1 MHz) | 0.30 | IEC 60250 | |
| Comparative Tracking Index (Solution A) | 600 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.400 mm, ALL) | V-0 | Internal Method | |
| Glow Wire Flammability Index 3(0.800 mm) | 960 | °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature 4(0.800 mm) | 725 | °C | IEC 60695-2-13 |
| Note Message | |
|---|---|
| 1 . | ±0.02 g/cm³ |
| 2 . | Continuous (GTP 50% Tensile) |
| 3 . | Typical property for uncolored material, not to be construed as specification |
| 4 . | Typical property for uncolored material, not to be construed as specification |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SPESIN® KP212G15V0 | Kolon Plastics, Inc. | PBT | SPESIN® |
| HANWHA LLDPE 3224 | Hanwha Chemical | LLDPE | HANWHA LLDPE |
| Kotex K-30UV | Kotec Corporation | PC | Kotex |
| Optix® CA-924 G | Plaskolite West, Inc. | Acrylic (PMMA) | Optix® |
| PENTAMID A GV25 H schwarz | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
