Order Products : sales@su-jiao.com
WPP PE WPP651
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Washington Penn Plastic Co. Inc. |
| Trademark: | WPP PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NQhhg5_WPP-PE-WPP651.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| The properties below are typical for a 20 melt linear low density polyethylene. WPP651 offers an easy mold flow and processability useful in housewares applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 22 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 10.0 | MPa | ISO 527-2/50 |
| Flexural Modulus 1 | 235 | MPa | ISO 178 |
| Additional Information |
|---|
| Tested at 23 ± 2°C (73.4 ± 3.6°F) and 50 ± 5% relative humidity unless otherwise noted. |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKAMID™ TA210G15 | Mando Advanced Materials Co., Ltd. | Nylon 66 | TEKAMID™ |
| Witcom PA66 3C | Witcom Engineering Plastics B.V. | Nylon 66 | Witcom PA66 |
| Zytel® 73G15L NC010 | DuPont Performance Polymers | Nylon 6 | Zytel® |
| Novalloy-A A5624 | Daicel Polymer Ltd. | ABS+Nylon | Novalloy-A |
| INEOS Wire & Cable BPD4035 | INEOS Olefins & Polymers Europe | MDPE | INEOS Wire & Cable |
