Order Products : sales@su-jiao.com
EMERGE™ PC 8701-15
| Category: | PC , Advanced Resin |
| Manufacturer: | Trinseo |
| Trademark: | EMERGE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NPD0Ca_EMERGEPC870115.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EMERGE™ PC 8701 Advanced Resin is an ignition-resistant, 10% glass reinforced polycarbonate resin. This resin does not contain chlorine or bromine additives. It is a medium flow PC resin with a mold release system, intended for applications requiring high stiffness. EMERGE PC 8701 has a UL94 V-0 rating at 1.5 mm. Main Characteristics:
Applications:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.28 | g/cm³ | ISO 1183/B |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 15 | g/10 min | ISO 1133 |
| shrinkage- Flow | 0.40 - 0.60 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| 4.00, injection molding | 3950 | MPa | ISO 527-2/1 |
| 4.00, injection molding | 4000 | MPa | ISO 527-2/50 |
| Tensile Stress | ISO 527-2/50 | ||
| Yield, 4.00mm, injection molding | 65.0 | MPa | ISO 527-2/50 |
| Fracture, 4.00mm, injection molding | 50.0 | MPa | ISO 527-2/50 |
| Tensile Strain | ISO 527-2/50 | ||
| Yield, 4.00mm, injection molding | 4.0 | % | ISO 527-2/50 |
| Fracture, 4.00mm, injection molding | 9.0 | % | ISO 527-2/50 |
| Flexural Modulus 1(23°C, 4.00 mm, Injection Molded) | 3800 | MPa | ISO 178 |
| Flexural Stress 2(23°C, 4.00 mm, Injection Molded) | 105 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 3(23°C, Injection Molded) | 9.0 | kJ/m² | ISO 180/A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 141 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 133 | °C | ISO 75-2/A |
| 1.8 MPa, annealed | 139 | °C | ISO 75-2/A |
| Vicat Softening Temperature | |||
| -- | 155 | °C | ISO 306/A120 |
| -- | 145 | °C | ISO 306/B50 |
| Ball Indentation Temperature | > 130 | °C | IEC 60335-1 |
| CLTE - Flow (-40 to 80°C) | 1.5E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+14 | ohms | IEC 60093 |
| Volume Resistivity (2.00 mm) | 1.0E+16 | ohms·cm | IEC 60093 |
| Dielectric Strength (2.00 mm) | > 70 | kV/mm | IEC 60243-1 |
| Dielectric Constant | IEC 60250 | ||
| 2.00 mm, 50 Hz | 3.00 | IEC 60250 | |
| 2.00 mm, 1 MHz | 3.10 | IEC 60250 | |
| Dissipation Factor | IEC 60250 | ||
| 2.00 mm, 50 Hz | 8.0E-3 | IEC 60250 | |
| 2.00 mm, 1 MHz | 0.016 | IEC 60250 | |
| Comparative Tracking Index (3.00 mm, Solution A) | 200 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating 4(1.5 mm) | V-0 | UL 94 | |
| Glow Wire Ignition Temperature 5 | IEC 60695-2-13 | ||
| 1.0 mm | 960 | °C | IEC 60695-2-13 |
| 2.0 mm | 960 | °C | IEC 60695-2-13 |
| 3.0 mm | 960 | °C | IEC 60695-2-13 |
| Oxygen Index 6 | 29 | % | ISO 4589-2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Processing (Melt) Temp | 290 - 315 | °C | |
| Mold Temperature | 80 - 115 | °C |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| 2 . | 2.0 mm/min |
| 3 . | 4 mm |
| 4 . | This rating is not intended to reflect the danger caused by this or any other material under actual fire conditions. |
| 5 . | This rating is not intended to reflect the danger caused by this or any other material under actual fire conditions. |
| 6 . | This rating is not intended to reflect the danger caused by this or any other material under actual fire conditions. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| REXtac® APAO RT 1310 | Huntsman Corporation | PAO | REXtac® APAO |
| ENSOFT SO-160-55A | ENPLAST, a Ravago Group Company | TPE | ENSOFT |
| Lifoflex® GC 1070 | Müller Kunststoffe GmbH | SEBS | Lifoflex® |
| LIHAN® A9000N | Nanjing Lihan Chemical Co., Ltd. | Nylon 66 | LIHAN® |
| Ultramid® A3HG6 HR | BASF Corporation | Nylon 66 | Ultramid® |
