Order Products : sales@su-jiao.com
DAI-EL™ G-783
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | DAIKIN AMERICA, INC. |
| Trademark: | DAI-EL™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NMue37_DAI-EL-G-783.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DAI-EL G-783 is a cure incorporated copolymer designed for transfer, compression and injection molding of products with complex profiles. G-783 offers improved mold release properties while maintaining good compression set resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.81 | g/cm³ | ASTM D792 |
| Mooney Viscosity (ML 1+10, 121°C) | 32 | MU | ASTM D1646 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 3.30 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 14.9 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 260 | % | ASTM D412 |
| Tear Strength (25°C) | 23.5 | kN/m | ASTM D624 |
| Compression Set | ASTM D395 | ||
| 25°C, 70 hr | 10 | % | ASTM D395 |
| 100°C, 70 hr | 7.0 | % | ASTM D395 |
| 175°C, 70 hr | 10 | % | ASTM D395 |
| 200°C, 70 hr | 18 | % | ASTM D395 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (230°C, 70 hr) | -2.0 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (230°C, 70 hr) | -4.0 | % | ASTM D573 |
| Change in Durometer Hardness in Air (Shore A, 230°C, 70 hr) | 0.0 | ASTM D573 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -22.0 | °C | ASTM D746 |
| Additional Information |
|---|
| All tests performed were performed under DAIKIN test methodsFluorine Content: 66%Curing characteristic, Measuring Temperature: 170°CCuring characteristic, Curelastomer: 2.1 minGehman torsion test, T2: -8.0°CGehman torsion test, T10: -16.0°CTR test, TR10: -18°CTR test, TR70: -9°C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TUFNYL® SGF 30 INDICA GREY | SRF Ltd. | Nylon 6 | TUFNYL® |
| PLUSTEK PB841 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
| Plenco 01530 (Transfer) | Plastics Engineering Co. | Polyester, TS | Plenco |
| ICORENE® 1761 V2 White 1802 | A. Schulman Europe | mMDPE | ICORENE® |
| TECHNYL® C 52G1 WHITE 2297 CF | Solvay Engineering Plastics | Nylon 6 | TECHNYL® |
