Order Products : sales@su-jiao.com
PRIMATOP HDPE 003952
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Amco Polymers |
| Trademark: | PRIMATOP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NMMYDZ_PRIMATOP-HDPE-003952.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Phillips Process Hexene Copolymer |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.35 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | |||
| F50 | 50.0 | hr | ASTM D1693B |
| 100% Igepal, F50 | 50.0 | hr | ASTM D1693A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 26.9 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | > 600 | % | ASTM D638 |
| Flexural Modulus | 1310 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -118 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | Type IV, 50 mm/min |
| 2 . | Type IV, 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Restramid PA 6 30GF | Polimarky Spolka Jawna | Nylon 6 | Restramid |
| TECHNYL® B 230 NATURAL | Solvay Engineering Plastics | Nylon 66/6 | TECHNYL® B |
| Tenite™ Acetate 105E1R26033 Clear, Trsp | Eastman Chemical Company | CA | Tenite™ Acetate |
| TEKNIFLEX® PGOA 25400 | Tekni-Films, a div of Tekni-Plex | Film, PETG/PCTFE | TEKNIFLEX® |
| UBE Nylon 5034 C2 | UBE Engineering Plastics, S.A. | Nylon 66/6 | UBE Nylon |
