Order Products : sales@su-jiao.com
Moplen EP301E
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Moplen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NF1C9l_Moplen-EP301E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LyondellBasell Australia's Polypropylene grade EP301E is a very low flow impact copolymer with a conventional molecular weight distribution and is formulated with a general-purpose additive package. EP301E is designed for extrusion and blow-moulding applications requiring good melt strength and good impact strength at low part weight. End use products typically made from EP301E include blow-moulded articles, extruded sheet, corrugated board and extruded profiles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183/D |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.80 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 68 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 25.0 | MPa | ISO 527-2 |
| Flexural Modulus | 1150 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | ISO 180/1A | ||
| -20°C | 4.0 | kJ/m² | |
| 0°C | 7.0 | kJ/m² | |
| 23°C | 20 | kJ/m² | |
| Falling Dart Impact (-40°C) | 11.0 | J | BS 2782 306B |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 77.0 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 50.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 150 | °C | ISO 306/A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| NILAMID® A3 GB50 | Nilit Plastics | Nylon 66 | NILAMID® |
| BJB Silicone TC-5045 A/B | BJB Enterprises, Inc. | Silicone | BJB Silicone |
| Bergamid™ AB700 UF SO | PolyOne Corporation | Nylon 66/6 | Bergamid™ |
| Edgetek™ PC-10GF/000 NC088 | PolyOne Corporation | PC | Edgetek™ |
| Petrothene® XL07420B | LyondellBasell Industries | Polyolefin, Unspecified | Petrothene® |
