Order Products : sales@su-jiao.com
POLYTROPE® TPP 293
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | POLYTROPE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NDxASB_POLYTROPE-TPP-293.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TPO 3% Glass Fiber |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow 1 | 0.95 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 59 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield) | 25.2 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 680 | % | ASTM D638 |
| Flexural Modulus 4 | 724 | MPa | ASTM D790 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Filler Content | 5.0 | % | ASTM D5630 |
| Note Message | |
|---|---|
| 1 . | 5x7 in plaque |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Badamid® A70 MoS2 | Bada AG | Nylon 66 | Badamid® |
| HiFill® PA6 GF30 IM BK | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| Lupoy® GP1000L | LG Chem Ltd. | PC | Lupoy® |
| OXNILON 66 13GF | Oxford Polymers | Nylon 66 | OXNILON 66 |
| Pujie ACM-02 | Zhanhua Pujie Chemical Technology Co.,Ltd | CPE | Pujie |
