Order Products : sales@su-jiao.com
Network Polymers Nylon 6615 HS Impact Modified
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | Network Polymers Nylon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NC2uWM_Network-Polymers-Nylon-6615-HS-Impact-Modified.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Network Polymers Nylon 6615 HS Impact Modified is a Polyamide 66 (Nylon 66) product. It is available in North America. |
| General Information | |
|---|---|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm) | 1.4 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 48.3 | MPa | ASTM D638 |
| Flexural Modulus | 1710 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 960 | J/m | ASTM D256 |
| Tensile Impact Strength 1 | 126 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 58.9 | °C | ASTM D648 |
| Peak Melting Temperature | 260 | °C | ASTM D3418 |
| Note Message | |
|---|---|
| 1 . | Type S |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen EPQ30M | Shazand (Arak) Petrochemical Corporation | PP Copolymer | Moplen |
| UNISOFT TPE™ ST-60A-BK-3-01 | UNITED SOFT PLASTICS, Inc. | SEBS | UNISOFT TPE™ |
| DIGITALWAX® RF 080 | DWS Systems | Unspecified | DIGITALWAX® |
| Durolon® V2600 | Unigel Plásticos | PC | Durolon® |
| Durolon® VR2000 CR010 | Unigel Plásticos | PC | Durolon® |
