Order Products : sales@su-jiao.com
HANWHA LDPE 955
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Hanwha Chemical |
| Trademark: | HANWHA LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | N8sR3C_HANWHA-LDPE-955.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HANWHA LDPE 955 is manufactured by autoclave process and designed for variety of extrusion coating application such as flexible packaging, paper coating etc. LDPE 955 is well known for its excellent neck-in, draw-down and high quality assurance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 7.7 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 9.32 | MPa | |
| Break | 9.81 | MPa | |
| Tensile Elongation (Break) | 450 | % | ASTM D638 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Water Vapor Transmission | 16 | g/m²/24 hr | ASTM F1249 |
| Heat Seal Strength 1 | 0.26 | MPa |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Allowable Coating Speed 2(305°C) | 5.0 | m/sec |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Neck-in 3 | 30.0 | mm |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 85.0 | °C | ASTM D1525 |
| Melting Temperature | 105 | °C | ASTM D3417 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 200 to 320 | °C | |
| Cylinder Zone 3 Temp. | 200 to 320 | °C | |
| Cylinder Zone 5 Temp. | 200 to 320 | °C | |
| Adapter Temperature | 320 | °C | |
| Die Temperature | 320 to 330 | °C |
| Note Message | |
|---|---|
| 1 . | PET (12µm) / Print / LDPE (20µm) / AI Foil (7µm) / LDPE 955 (20µm)Time/Temperature: 305°C, Line Speed : 100m/min, Output: 80kg/hr |
| 2 . | Melt Temperature : 305°C, Line Speed : 100m/min., Output: 80kg/hr |
| 3 . | Melt Temperature : 305°C, Line Speed : 100m/min., Output: 80kg/hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Fainplast PVC PM 6805 | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| Gallonprene® GP310-553A | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| 3M™ Dyneon™ Fluoroelastomer FX 9194 | 3M Advanced Materials Division | Fluorelastomer | 3M™ Dyneon™ Fluoroelastomer |
| IDI SMC E-203 | IDI Composites International | TS, Unspecified | IDI SMC |
| SQUARE® SSR1501-45A/B | Shenzhen SQUARE Silicone Co., Ltd. | Silicone | SQUARE® |
