Order Products : sales@su-jiao.com
Generic CAB
| Category: | CAB , Cellulose Acetate Butyrate |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | N7oSDw_Generic-CAB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic CAB This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.16 - 1.21 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.40 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 1.2 - 1.8 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (23°C) | 40 - 79 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, 23°C | 15.9 - 43.0 | MPa | ASTM D638 |
| Fracture, 23°C | 24.1 - 51.6 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 29 - 50 | % | ASTM D638 |
| Flexural Modulus (23°C) | 827 - 1790 | MPa | ASTM D790 |
| Flexural Strength | |||
| 23°C | 22.8 - 60.0 | MPa | ASTM D790 |
| 23°C | 24.0 - 56.0 | MPa | ISO 178 |
| Yield, 23°C | 21.4 - 45.5 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 140 - 530 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, annealed | 68.0 - 85.6 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 51.7 - 85.6 | °C | ASTM D648 |
| 1.8 MPa, annealed | 52.0 - 74.3 | °C | ASTM D648 |
| Vicat Softening Temperature | 87.6 - 116 | °C | ASTM D1525 |
| CLTE - Flow | 1.8E-5 - 2.2E-5 | cm/cm/°C | ASTM D696 |
| Specific Heat (23°C) | 1460 - 1470 | J/kg/°C | ASTM C351 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 191 - 243 | °C | |
| Mold Temperature | 32.2 - 71.2 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic CABThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECAPEEK® CF30 | Ensinger Inc. | PEEK | TECAPEEK® |
| Ultramid® B3S HP | BASF Corporation | Nylon 6 | Ultramid® |
| APEX® 90-A472R-55-NT | Teknor Apex Company | PVC, Flexible | APEX® |
| KMI PBS KM803S | KMI Group Inc. | PBS | KMI PBS |
| LUVOCOM® 1-9043 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
