Order Products : sales@su-jiao.com
Nanjing Hongrui PP P860
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Nanjing Hongrui Engineering Plastics Co., Ltd. |
| Trademark: | Nanjing Hongrui PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | N6MuYA_Nanjing-Hongrui-PP-P860.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Nanjing Hongrui PP P860 is a Polypropylene material filled with 30% mineral. It is available in Asia Pacific. Primary attribute of Nanjing Hongrui PP P860: Flame Rated. Typical applications include:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.14 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 105 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 30.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 3.0 | % | ASTM D638 |
| Flexural Modulus | 2000 | MPa | ASTM D790 |
| Flexural Strength | 45.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Area) | 6.00 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 120 | °C | ASTM D648 |
| Melting Temperature | 170 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+14 | ohms | ASTM D257 |
| Dielectric Strength | 19 | kV/mm | ASTM D149 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PureTherm® 3007C EV5 | Tekni-Films, a div of Tekni-Plex | Film, PE/EVOH/PE/PVC | PureTherm® |
| TRIEL® 5500 | Samyang Corporation | TPEE | TRIEL® |
| Dryflex® 600550S | ELASTO | SEBS | Dryflex® |
| Hostacom CB271FC | LyondellBasell Industries | TPO (POE) | Hostacom |
| EPAMOULD 290A10T | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
