| Category: | PSU , Polysulfone |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | N65BUY_Generic-PSU---Carbon-Fiber.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PSU - Carbon Fiber This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.27 - 1.30 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.095 - 0.21 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus (23°C) | 4140 - 21400 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 43 - 96 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 177 - 182 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 135 | °C | |
| Drying Time | 3.5 - 4.0 | hr | |
| Mold Temperature | 121 - 122 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic PSU - Carbon FiberThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® TL-1934E | Teknor Apex Company | TES | Telcar® |
| Moplen PP400N | LyondellBasell Industries | PP Homopolymer | Moplen |
| NANCAR® 1022 | Nantex Industry Co., Ltd. | NBR | NANCAR® |
| Gallonprene® GP420-7003 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| SARANEX™ 750 Clear | The Dow Chemical Company | PVDC | SARANEX™ |