Order Products : sales@su-jiao.com
Laprene® 8ST193A80/T2
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Laprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | N2xqFf_Laprene-8ST193A80-T2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Laprene® 8ST193A80/T2 is a Styrene Ethylene Butylene Styrene Block Copolymer (SEBS) material. It is available in Europe, Latin America, or North America for injection molding. Primary attribute of Laprene® 8ST193A80/T2: REACH Compliant. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.910 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 3 sec) | 84 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | 24 | % | ASTM D412 |
| Tensile Stress 1(100% Strain) | 3.70 | MPa | ASTM D412 |
| Tensile Strength 2 | 12.5 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 780 | % | ASTM D412 |
| Tear Strength 4 | 50.0 | kN/m | ASTM D624 |
| Compression Set 5(70°C, 22 hr) | 30 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 170 | °C | |
| Middle Temperature | 180 | °C | |
| Front Temperature | 180 | °C | |
| Nozzle Temperature | 190 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| 3 . | Die C |
| 4 . | Die C |
| 5 . | Type 1 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 305 TFE 15 SI 2 HB | RTP Company | PC | RTP |
| Elastocon® 8058N | Elastocon TPE Technologies | TPE | Elastocon® |
| LEXAN™ 135 resin | SABIC Innovative Plastics Europe | PC | LEXAN™ |
| PENTAMID B S GV15 H natural | PENTAC Polymer GmbH | Nylon 6 | PENTAMID B |
| Styropek® P 440MH | Styropek S.A. de C.V. | PS (EPS) | Styropek® |
