Order Products : sales@su-jiao.com
Sunny® PA6 HF230
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Guangdong Shunde Shunyan New Material Co., Ltd. |
| Trademark: | Sunny® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | N0v1Vk_Sunny-PA6-HF230.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EP halogen-free flame reinforced Polyamide 6 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- 1 | 1.49 | g/cm³ | ASTM D792 |
| 23°C | 1.49 | g/cm³ | ISO 1183 |
| Molding Shrinkage | |||
| Flow : 23°C | 0.20 to 0.40 | % | ASTM D955 |
| 23°C | 0.20 to 0.40 | % | ISO 294-4 |
| Water Absorption | |||
| Equilibrium, 23°C | 1.0 | % | ASTM D570 |
| Equilibrium, 23°C, 50% RH | 1.0 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| -- 2 | 120 | MPa | ASTM D638 |
| -- | 120 | MPa | ISO 527-2/5 |
| Tensile Elongation | |||
| Break 3 | 3.8 | % | ASTM D638 |
| Break | 4.0 | % | ISO 527-2/5 |
| Flexural Modulus | |||
| 50.0 mm Span | 7270 | MPa | ASTM D790 |
| 50.0 mm Span | 7500 | MPa | ISO 178 |
| Flexural Strength | |||
| 50.0 mm Span | 174 | MPa | ASTM D790 |
| -- 4 | 180 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 75 | J/m | ASTM D256 |
| 23°C | 7.0 | kJ/m² | ISO 180/1A |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.60 mm | V-0 | ||
| 3.20 mm | V-0 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 110 to 120 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Rear Temperature | 250 | °C | |
| Middle Temperature | 240 | °C | |
| Front Temperature | 240 | °C | |
| Processing (Melt) Temp | 250 | °C | |
| Mold Temperature | 90.0 | °C | |
| Injection Rate | Moderate-Fast |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | 5.0 mm/min |
| 3 . | 5.0 mm/min |
| 4 . | 50 mm span |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ZYLAR® 960 | INEOS Styrolution Group GmbH | MMBS | ZYLAR® |
| U-polymer UG-100-30 | UNITIKA Plastics Division | Polyarylate | U-polymer |
| ALTECH® PP-H A 2030/750 GF30 CP | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® PP-H |
| Expandable PS RP43W | INEOS Styrenics International SA | PS (EPS) | Expandable PS |
| GAPEX® RPP20EB61HB NATURAL | Ferro Corporation | PP Homopolymer | GAPEX® |
