Order Products : sales@su-jiao.com
ADMER™ QF300E
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Mitsui Chemicals Europe GmbH |
| Trademark: | ADMER™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MyeYPG_ADMER-QF300E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ADMER® QF300E is a maleic anhydride grafted, homo-PP based adhesive resin with a good processability in cast film application with PP and PA. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.2 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 68 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 30.0 | MPa | |
| Break | 31.0 | MPa | |
| Tensile Elongation (Break) | > 500 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (Area) | 0.0900 | kJ/m² | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 146 | °C | ASTM D1525 |
| Peak Melting Temperature | 163 | °C | ASTM D3418 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ PPH-20G Black | PolyOne Corporation | PP Homopolymer | Maxxam™ |
| MITELA® HD8B | Schwartz Technical Plastic | PF | MITELA® |
| STABAMID® 26 AE 2 | Solvay Polyamide & Intermediates | Nylon 66 | STABAMID® |
| Chemical Resources PP 1200NW4 | Chemical Resources, Inc. | PP Homopolymer | Chemical Resources |
| Plasmer 2080B/8901 | HYUNDAI EP Co., Ltd. | TPE | Plasmer |
