Order Products : sales@su-jiao.com

SureSpec LLC4-010

Category:	LLDPE , Linear Low Density Polyethylene
Manufacturer:	Genesis Polymers
Trademark:	SureSpec
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	My8O3Y_SureSpec-LLC4-010.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
LLC4-010 is a Butene-comonomer certified prime resin designed for Blown films for general purpose packaging. LLC4-010 features a wide heat sealing temperature range easy processability and good film strength as well as wide heat sealing temperature range. LLC4-010 complies with FDA regulation 21CFR 177.1520(c) 3.1a, and with most international regulations concerning the use of Polyethylene in contact with food articles. LLC4-010 contains no slip and no antiblock. Also Available in: B = Barefoot A= 0 Slip / High Anti Block (0/6500) F = Full Adds (1500/6500)

Message

LLC4-010 is a Butene-comonomer certified prime resin designed for Blown films for general purpose packaging. LLC4-010 features a wide heat sealing temperature range easy processability and good film strength as well as wide heat sealing temperature range. LLC4-010 complies with FDA regulation 21CFR 177.1520(c) 3.1a, and with most international regulations concerning the use of Polyethylene in contact with food articles. LLC4-010 contains no slip and no antiblock.

Also Available in:
B = Barefoot
A= 0 Slip / High Anti Block (0/6500)
F = Full Adds (1500/6500)

General Information
Features	Butene Comonomer Food Contact Acceptable Good Processability Good Strength Low Density
Uses	Blown Film Packaging
Agency Ratings	FDA 21 CFR 177.1520(c) 3.1a
Forms	Pellets
Processing Method	Blown Film

Physical	Nominal Value	Unit	Test Method
Density	0.918	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.0	g/10 min	ASTM D1238

Films	Nominal Value	Unit	Test Method
Film Thickness - Tested	25	µm
Secant Modulus - 1% Secant, MD (25 µm)	193	MPa	ASTM D882
Tensile Strength - MD			ASTM D882
Yield, 25 µm ¹	11.0	MPa
Break, 25 µm	31.0	MPa
Tensile Elongation - MD (Break, 25 µm)	550	%	ASTM D882
Dart Drop Impact ²(25 µm)	90	g	ASTM D1709A
Elmendorf Tear Strength - MD (25 µm)	100	g	ASTM D1922

Note Message
1 .	1.3 mm/min
2 .	F50

Resin Grade	Manufacturer	Category	Trademark
Sevrene® 6750-70A	Vi-Chem Corporation	TPE	Sevrene®
SIBUR Synthetic Rubber BR-1203 Ti Grade A	SIBUR, LLC	PBR, High Cis	SIBUR Synthetic Rubber
Starex LX-0970 LS	SAMSUNG SDI CO., LTD.	ABS	Starex
Sylvin 8983-85 White 1196	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Clyrell RC2472	LyondellBasell Industries	PP Random Copolymer	Clyrell