Order Products : sales@su-jiao.com
Safrene® D 7255HL
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Safripol (PTY) LTD |
| Trademark: | Safrene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MxzHAF_Safrene-D-7255HL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Safrene® D 7255HL Polyethylene Resins is an injection moulding grade with good mechanical strength, high stiffness, good environmental stress-crack resistance and low distortion tendency. It is particularly suitable for durable thick walled articles. Safrene® D 7255HL Polyethylene Resin is stabilized against UV degradation. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.949 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | ISO 1133 | ||
| 190°C/2.16 kg | 3.0 | g/10 min | |
| 190°C/5.0 kg | 11 | g/10 min | |
| Spiral Flow | 39.0 | cm | Internal Method |
| Viscosity Number (Reduced Viscosity) | 160.0 | ml/g | ISO 1628 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Compression Molded) | 64 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2/50 | ||
| Yield, Compression Molded | 26.0 | MPa | |
| Break, Compression Molded | 30.0 | MPa | |
| Tensile Strain (Break, Compression Molded) | > 600 | % | ISO 527-2/50 |
| Flexural Stress (3.5% Strain, Compression Molded) | 22.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | ||
| -30°C, Compression Molded | 5.0 | kJ/m² | |
| 23°C, Compression Molded | 5.0 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 70.0 | °C | ISO 306/B |
| Peak Crystallization Temperature (DSC) | 130 to 133 | °C | ISO 3146 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 200 to 260 | °C |
| Note Message | |
|---|---|
| 1 . | Unannealed |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Melinex® 377 | DuPont Teijin Films U.S. | Polyester, TP | Melinex® |
| Mylar® A (300 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| Fainplast PVC GK 91 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| Plenco 06582 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
| LNP™ LUBRICOMP™ DL003E compound | SABIC Innovative Plastics | PC | LNP™ LUBRICOMP™ |
