Order Products : sales@su-jiao.com

STERalloy™ FDG 2781

Category:	TP, Unspecified , Thermoplastic
Manufacturer:	Hapco Inc.
Trademark:	STERalloy™ FDG
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	MwNoGC_STERalloy-FDG-2781.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

STERalloy FDG is the first Liquid Molding Polymer Alloy Series that has been specifically designed for food and drug applications. All of products in the STERalloy FDG Series exhibit unique physical and chemical properties and have been used in numerous applications where biocompatibility is required.

Key Advantages:

Approvable Materials

Wide range of hardnesses

ROHS compliant

Very high physical properties

Low moisture sensitivity

Easy to use

The food, drug, pharmaceutical, wine, beer, juice, dairy, hospital equipment, and prosthetic industries are just some examples of applications that utilize special products such as STERalloy FDG.

STERalloy FDG Elastomeric Series:

various hardness elastomers, shore 20A - 72D

clear in color

available in 2 speeds - fast and slow

STERalloy FDG Rigid Series:

rigid, tough polymer alloy plastics

high heat distortion

high physical properties

General Information
Features	Food Contact Acceptable Good Processability
Uses	Filtration Media Food Containers Medical/Healthcare Applications Non-specific Food Applications Pharmaceuticals Prosthetics
RoHS Compliance	RoHS Compliant
Appearance	Clear/Transparent
Forms	Liquid

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.01	g/cm³	ASTM D4669
Molding Shrinkage - Flow	0.050 to 0.20	%	ASTM D2566
Weight - per cubic inch	17	g

Thermoset	Nominal Value	Unit	Test Method
Gel Time ¹(25°C)	20.0	min	ASTM D2971

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	80		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	14.8	MPa	ASTM D638
Tensile Elongation (Break)	520	%	ASTM D638

Elastomers	Nominal Value	Unit	Test Method
Tear Strength ²	45.5	kN/m	ASTM D624

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	No Break		ASTM D256
Unnotched Izod Impact	No Break		ASTM D256

Thermoset	Nominal Value	Unit	Test Method
Thermoset Components
Part A	Mix Ratio by Weight: 100, Mix Ratio by Volume: 100
Part B	Mix Ratio by Weight: 25, Mix Ratio by Volume: 25
Thermoset Mix Viscosity (25°C)	3000	cP	ASTM D4878
Demold Time (21°C)	300 to 480	min	Internal Method

Note Message
1 .	100 g
2 .	Die C

Resin Grade	Manufacturer	Category	Trademark
RTP 287 HS	RTP Company	Nylon 66	RTP
RAMOFIN PPC301G2	Polyram Ram-On Industries	PP Copolymer	RAMOFIN
Nypol® PA A3 ST HS PRTA011 NR365 MSP	Petropol Industry and Trade of Polymers LTDA	Nylon 66	Nypol® PA
DURANEX® 733LD	Polyplastics Co., Ltd.	PBT+SAN	DURANEX®
Sylvin 8200-70 White 1452	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin