Order Products : sales@su-jiao.com
BFI 428
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Blueridge Films Inc. |
| Trademark: | BFI |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MtOfWk_BFI-428.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| BFI 428 is a High Density Polyethylene material. It is available in North America. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.947 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.28 | g/10 min | |
| 190°C/21.6 kg | 20 | g/10 min |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D882A | ||
| MD : Yield | 24.1 | MPa | |
| TD : Yield | 25.5 | MPa | |
| MD : Break | 54.5 | MPa | |
| TD : Break | 39.3 | MPa | |
| Tensile Elongation 2 | ASTM D882A | ||
| MD : Break | 600 | % | |
| TD : Break | 700 | % | |
| Dart Drop Impact | 100 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 28 | g | |
| TD | 530 | g | |
| Water Vapor Transmission 3 | 7.8 | g/m²/24 hr | ASTM E96 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Melting Temperature | 126 | °C |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | Procedure E |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Moplen HP640J | LyondellBasell Industries | PP Homopolymer | Moplen |
| Europrene® SOL T 6320 | Versalis S.p.A. | SBS | Europrene® |
| ELASTOSIL® M 4641 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® M |
| Hanwha Total PP KL11SW | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, Unspecified | Hanwha Total PP |
| LIHAN® T9703EP | Nanjing Lihan Chemical Co., Ltd. | PBT | LIHAN® |
