Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
Manufacturer: | Generic |
Trademark: | Generic |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | MqNl2s_Generic-TPO-POE---Mineral.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
This data represents typical values that have been calculated from all products classified as: Generic TPO (POE) - Mineral This information is provided for comparative purposes only. |
General Information | |
---|---|
Filler / Reinforcement |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density (23°C) | 0.940 to 1.13 | g/cm³ | ISO 1183 |
Melt Mass-Flow Rate (MFR) | |||
230°C/2.16 kg | 0.50 to 31 | g/10 min | ASTM D1238 |
230°C/2.16 kg | 6.0 to 30 | g/10 min | ISO 1133 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Stress (Yield, 23°C) | 16.0 to 24.1 | MPa | ISO 527-2 |
Tensile Strain (Yield, 23°C) | 4.0 to 14 | % | ISO 527-2 |
Flexural Modulus (23°C) | 900 to 2210 | MPa | ISO 178 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Notched Izod Impact Strength (23°C) | 19 to 51 | kJ/m² | ISO 180 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Heat Deflection Temperature | |||
0.45 MPa, Unannealed | 80.8 to 125 | °C | ISO 75-2/B |
1.8 MPa, Unannealed | 47.0 to 57.2 | °C | ISO 75-2/A |
CLTE - Flow | 4.4E-5 to 6.2E-5 | cm/cm/°C | ASTM E228, ISO 11359-2 |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Sarlink® TPE ML-1150DN | Teknor Apex Company | TPE | Sarlink® TPE |
Toughblend® PP-1200 | Colour Image Plastic Compound Sdn. Bhd. (CIPC) | PP, Unspecified | Toughblend® |
KOPA® KN333G30BLS | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
RONFALIN® ABS 1314 GB 10 | A. Schulman Europe | ABS | RONFALIN® |
NORYL™ PX0844 resin | SABIC Innovative Plastics | PPE+PS | NORYL™ |