Order Products : sales@su-jiao.com
PRIMALLOY® A1800
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
| Trademark: | PRIMALLOY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MpayH8_PRIMALLOY-A1800.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PRIMALLOY® A1800 is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific, Europe, or North America. |
| General Information | |
|---|---|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.07 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 29 | g/10 min | ISO 1133 |
| Molding Shrinkage 1 | Internal Method | ||
| Across Flow : 2.00 mm | 0.80 | % | |
| Flow : 2.00 mm | 0.30 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 84 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 12.0 | MPa | ISO 37 |
| Tensile Elongation (Break) | 820 | % | ISO 37 |
| Compression Set 2(70°C, 22 hr) | 68 | % | ISO 815 |
| Note Message | |
|---|---|
| 1 . | 120x120x2 mm test plaque |
| 2 . | 6 sheets (each thickness = 2mm) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Staramide RFB24 | Eurostar Engineering Plastics | Nylon 66 | Staramide |
| Starex SD-0150 W | SAMSUNG SDI CO., LTD. | ABS | Starex |
| Evolue™-H SP6505 | Prime Polymer Co., Ltd. | HDPE | Evolue™-H |
| Bergadur™ PB40 G10 H U colored | PolyOne Corporation | PBT | Bergadur™ |
| LUVOCOM® 1301/CF/20 | LEHVOSS Group | PPS | LUVOCOM® |
