Order Products : sales@su-jiao.com
DOW™ LLDPE DNDA-7340 NT 7
| Category: | LLDPE , Linear Low Density Polyethylene Resin |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | DOW™ LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MpGozb_DOW-LLDPE-DNDA-7340-NT-7.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
DOW DNDA-7340 NT 7 Linear Low Density Polyethylene (LLDPE) Resin offers outstanding flex life, toughness and environmental stress crack resistance (ESCR) and is well-suited for use in blow molding applications such as small, squeezable bottles, as well as, extruded flexible hoses and, tubing. Offering high melt strength, excellent toughness and outstanding ESCR, DOW DNDA- 7340 NT 7 LLDPE resin also is well-suited for use in large blow molded parts, such as drum liners. Additionally, It may also be used in certain sheet and tubing applications where these properties are also important. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.920 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 0.65 | g/10 min | ASTM D1238 |
| 190°C/21.6 kg | 48 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 100% Igepal, F50) | > 1500 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 49 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 11.0 | MPa | ASTM D638 |
| Fracture | 13.8 | MPa | ASTM D638 |
| Tensile Elongation | ASTM D638 | ||
| Yield | 3.0 | % | ASTM D638 |
| Fracture | 700 | % | ASTM D638 |
| Flexural Modulus - 2% Secant | 345 | MPa | ASTM D790B |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength 1 | 252 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 42.0 | °C | ASTM D648 |
| Brittleness Temperature | < -76.1 | °C | ASTM D746 |
| Vicat Softening Temperature | 98.9 | °C | ASTM D1525 |
| Melting Temperature (DSC) | 119 | °C | Internal method |
| Peak Crystallization Temperature (DSC) | 107 | °C | Internal method |
| Additional Information |
|---|
| 根据 ASTM D 4976 进行基板模制和测试。 |
| Note Message | |
|---|---|
| 1 . | Type s |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PC GP2103 | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| Ad-Tech Polyester NO. 31M BOAT BONDING | Ad-Tech Plastic Systems Corp. | Polyester, TS | Ad-Tech Polyester |
| Kepamid® 2350GFH | Korea Engineering Plastics Co., Ltd | Nylon 66 | Kepamid® |
| Sylvin 7833-60 Red 6285 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| LNP™ LUBRICOMP™ KAL22 compound | SABIC Innovative Plastics Europe | Acetal (POM) Copolymer | LNP™ LUBRICOMP™ |
