Order Products : sales@su-jiao.com
VICTREX® PEEK 150G903 Black
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Victrex plc |
| Trademark: | VICTREX® PEEK |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MgFMuF_VICTREX-PEEK-150G903-Black.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Product Description: High performance thermoplastic material, unreinforced PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding, easy flow, FDA food contact compliant, colour black. Typical Application Areas: Complex geometries with thin cross sections or long flow lengths, for high strength and stiffness as well as good ductility. Chemically resistant to aggressive environments, suitable for sterilization for medical and food contact applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | ISO 1183 | ||
| -- 1 | 1.26 | g/cm³ | ISO 1183 |
| -- 2 | 1.30 | g/cm³ | ISO 1183 |
| Spiral Flow | 22.0 | cm | |
| Molding Shrinkage 3 | ISO 294-4 | ||
| Vertical flow direction | 1.3 | % | ISO 294-4 |
| Flow direction | 1.0 | % | ISO 294-4 |
| Water Absorption | ISO 62 | ||
| 23°C, 24 hr, 3.20 mm | 0.070 | % | ISO 62 |
| Saturated, 23°C | 0.40 | % | ISO 62 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (23°C) | 85 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 3700 | MPa | ISO 527-2 |
| Tensile Stress (Yield, 23°C) | 100 | MPa | ISO 527-2 |
| Tensile Strain (Break, 23°C) | 15 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 4300 | MPa | ISO 178 |
| Flexural Stress | ISO 178 | ||
| 3.5% strain, 23°C | 125 | MPa | ISO 178 |
| 23°C | 170 | MPa | ISO 178 |
| 125°C | 80.0 | MPa | ISO 178 |
| 175°C | 17.0 | MPa | ISO 178 |
| 275°C | 12.0 | MPa | ISO 178 |
| Compressive Stress | ISO 604 | ||
| 23°C | 130 | MPa | ISO 604 |
| 120°C | 80.0 | MPa | ISO 604 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 4.5 | kJ/m² | ISO 180/A |
| Unnotched Izod Impact Strength (23°C) | No Break | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 156 | °C | ISO 75-2/Af |
| Glass Transition Temperature | 143 | °C | ISO 11357-2 |
| Melting Temperature | 343 | °C | ISO 11357-3 |
| Linear thermal expansion coefficient | ISO 11359-2 | ||
| Flow : < 143°C | 5.0E-5 | cm/cm/°C | ISO 11359-2 |
| Flow : > 143°C | 1.2E-4 | cm/cm/°C | ISO 11359-2 |
| Lateral : < 143°C | 5.5E-5 | cm/cm/°C | ISO 11359-2 |
| Lateral : > 143°C | 1.4E-4 | cm/cm/°C | ISO 11359-2 |
| Thermal Conductivity (23°C) | 0.30 | W/m/K | |
| Specific Heat Capacity (23°C) | 2200 | J/kg/°C | DSC |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Toxicity | NES 713 | ||
| -- 4 | 0.220 | NES 713 | |
| -- 5 | 0.150 | NES 713 | |
| -- 6 | 0.0740 | NES 713 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | IEC 60093 | ||
| 23°C | 1.0E+16 | ohms·cm | IEC 60093 |
| 125°C | 1.0E+15 | ohms·cm | IEC 60093 |
| 275°C | 1.0E+9 | ohms·cm | IEC 60093 |
| Dielectric Strength (2.00 mm) | 24 | kV/mm | IEC 60243-1 |
| Comparative Tracking Index | 150 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glow Wire Flammability Index (2.00 mm) | 960 | °C | IEC 60695-2-12 |
| Oxygen Index | ISO 4589-2 | ||
| -- 7 | 24 | % | ISO 4589-2 |
| -- 8 | 35 | % | ISO 4589-2 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity (400°C) | 140 | Pa·s | Internal method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 - 150 | °C | |
| Drying Time | 3.0 - 5.0 | hr | |
| Hopper Temperature | < 100 | °C | |
| Rear Temperature | 360 | °C | |
| Middle Temperature | 355 | °C | |
| Front Temperature | 350 | °C | |
| Nozzle Temperature | 365 | °C | |
| Mold Temperature | 160 - 200 | °C |
| Injection instructions |
|---|
| Runner: Die/nozzle >3mm, manifold >3.5mmGate: >1mm or .5 x part thickness |
| Note Message | |
|---|---|
| 1 . | Amorphous |
| 2 . | Crystalline |
| 3 . | 365°C nozzle, 160°C tool |
| 4 . | Total gasses |
| 5 . | CO2 content |
| 6 . | CO content |
| 7 . | .4 mm |
| 8 . | 3.2 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TechnoFiber PP LGF50-10 HI | TechnoCompound GmbH | PP, Unspecified | TechnoFiber |
| ELASTICHEM™ 3511TX-02 | Colorite Polymers | PVC, Flexible | ELASTICHEM™ |
| Geon™ SF M7000 | PolyOne Corporation | PVC, Rigid | Geon™ SF |
| Ketron® PEEK-GF30 | Quadrant Engineering Plastic Products | PEEK | Ketron® |
| INFUSE™ 9100 | The Dow Chemical Company | OBC | INFUSE™ |
