Order Products : sales@su-jiao.com
Adell Polyamide AL-38
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Adell Plastics, Inc. |
| Trademark: | Adell Polyamide |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Mg4mGM_Adell-Polyamide-AL-38.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Adell Polyamide AL-38 is a Polyamide 66 (Nylon 66) material filled with 40% glass\mineral. It is available in North America. Primary attribute of Adell Polyamide AL-38: Flame Rated. Typical application of Adell Polyamide AL-38: Automotive |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.47 to 1.49 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.40 to 0.70 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.60 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | ASTM D785 | ||
| M-Scale | 98 | ||
| R-Scale | 122 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 138 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.0 to 3.0 | % | ASTM D638 |
| Flexural Modulus | 7580 | MPa | ASTM D790 |
| Flexural Strength | 193 | MPa | ASTM D790 |
| Compressive Strength | 255 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.18 mm) | 43 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 249 | °C | |
| 1.8 MPa, Unannealed | 246 | °C | |
| Melting Temperature | 254 to 271 | °C | ASTM D789 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tru-Bond™ PB 3500 | Devcon | Acrylic, Unspecified | Tru-Bond™ |
| 3M™ Dyneon™ PTFE TF 2072Z | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE |
| DeWAL DW 300-1 | DeWAL Industries | PI, TP | DeWAL |
| KOPA® KN135G33BLHS | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
| Hyundai EP PPF HT130 | HYUNDAI EP Co., Ltd. | PP Homopolymer | Hyundai EP PPF |
