Monprene® SP-19985 XRD2 (PRELIMINARY DATA) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Monprene SP-19985 XRD2 is a high performance thermoplastic elastomer designed for a variety of consumer sporting goods applications including playground flooring requiring a soft, rubber-like feel. Monprene SP-19985 XRD2, available in NAT and colors, is a higher hardness, medium density, UV stabilized grade that exhibits excellent abrasion resistance and is suitable for injection molding.

General Information
Features	Sunlight Resistant smoothness Light stabilization Good UV resistance Good coloring High liquidity Ablation resistance Lubrication Fill brominated High hardness Medium density Flame retardancy
Uses	Floor Material Rubber substitution
RoHS Compliance	RoHS compliance
Appearance	Blue Natural color
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.02	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	24	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shore A, 1 second, injection molding	87	ASTM D2240
Shore A, 5 seconds, injection molding	85	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹			ASTM D412
Transverse flow : 100% strain	4.87	MPa	ASTM D412
Flow : 100% strain	5.77	MPa	ASTM D412
Transverse flow : 300% strain	6.32	MPa	ASTM D412
Flow : 300% strain	7.43	MPa	ASTM D412
Tensile Strength ²			ASTM D412
Transverse flow : Fracture	9.10	MPa	ASTM D412
Flow : Fracture	9.94	MPa	ASTM D412
Tensile Elongation ³			ASTM D412
Transverse flow : Fracture	600	%	ASTM D412
Flow : Fracture	550	%	ASTM D412
Tear Strength ⁴			ASTM D624
Transverse flow	37.3	kN/m	ASTM D624
Flow	44.8	kN/m	ASTM D624
Compression Set ⁵			ASTM D395B
23°C, 22 hr	40	%	ASTM D395B
70°C, 22 hr	71	%	ASTM D395B

Flammability	Nominal Value	Unit	Test Method
Oxygen Index	20	%	ASTM D2863

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	193 - 216	°C
Middle Temperature	193 - 216	°C
Front Temperature	193 - 216	°C
Nozzle Temperature	193 - 216	°C
Processing (Melt) Temp	193 - 216	°C
Mold Temperature	16 - 32	°C
Injection Pressure	1.38 - 6.89	MPa
Injection Rate	Moderate-Fast
Back Pressure	0.172 - 0.345	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Note Message
1 .	C mold, 510mm/min
2 .	C mold, 510mm/min
3 .	C mold, 510mm/min
4 .	C mold, 510mm/min
5 .	Type 1

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Mepg5C_MonpreneSP19985XRD2PRELIMINARYDATA.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Retpol® 3019 HS	PolyPacific Pty. Ltd.	PP, Unspecified	Retpol®
Sup-tech T706	Shanghai Suptech Engineering Plastics Co. Ltd.	PBT	Sup-tech
Sylvin 9302-65FU Black	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
Fainplast PVC RE 425	Fainplast Compounds S.r.l	PVC, Rigid	Fainplast PVC
Hostacom PP 3100 10	LyondellBasell Industries	PP Copolymer	Hostacom