Order Products : sales@su-jiao.com
KMI 223L
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | KMI Group, Inc. |
| Trademark: | KMI |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MaTo8U_KMI223L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
KMI 223L is a general purpose ABS and by continuous Mass, is a high flow injection moulding grade having good impact resistance coupled with an excellent gloss. Designation: Thermoplastic ISO 2580-ABS 1,MG,095-25-16-25 Applications: Widely used in the small and large household appliances sector, vacuum cleaners, toys, telephones and consumer electronics. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.04 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 26 | g/10 min | ISO 1133 |
| Water Absorption (Equilibrium) | 0.30 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 109 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 45.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 20 | % | ASTM D638 |
| Flexural Modulus | 2350 | MPa | ASTM D790 |
| Flexural Strength | 69.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 10 | kJ/m² | DIN 53453 |
| Charpy Unnotched Impact Strength | No Break | DIN 53453 | |
| Notched Izod Impact | |||
| -- | 100 170 70 50 | J/m | ISO 180/4A |
| -- | 13 6.0 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 96.0 | °C | ISO 306/A120, ISO 306/B120 |
| CLTE - Flow | 1.7E-6 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.40 - 0.60 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+14 | ohms | IEC 60093 |
| Volume Resistivity | 1.0E+15 | ohms·cm | IEC 60093 |
| Dielectric Strength | 30 | kV/mm | IEC 60243-1 |
| Dielectric Constant | 3.10 | IEC 60250 | |
| Dissipation Factor | 0.015 | IEC 60250 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (Tested by KMI) | HB | UL 94 | |
| Glow Wire Ignition Temperature | 650 | °C | IEC 60695-2-13 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 220 - 250 | °C | |
| Mold Temperature | 40 - 70 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® TL-2683A | Teknor Apex Company | TPO (POE) | Telcar® |
| MORETEC™ 0218CM | Prime Polymer Co., Ltd. | LLDPE | MORETEC™ |
| Xuchuan XCUR-M9500 | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| ARC ARC1420 | ARC Resin Corporation | ABS | ARC |
| OmniCarb™ PC08FR GF40 | OMNI Plastics, LLC | PC | OmniCarb™ |
