Category: | Silicone , Silicone |
Manufacturer: | DONGJUE SILICONE (NANJING) CO., LTD |
Trademark: | DJSilicone |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | MZZN9F_DJSilicone-NE-7140.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Common silicone rubber for molding&extrusion has excellent high and low temperature resistance, electrical performance, and physical and mechanical properties. Despite of slightly worse transparency than general silicone rubber, it is more suitable for manufacturing colored products. There are two kinds of this product, namely modifying silicone rubber for molding and modifying silicone rubber for extrusion. The former can be vulcanized by DMDBH and used for manufacturing industrial accessories like keypad, seal ring and seal pad etc, while the latter can be vulcanized by DCBP and used for manufacturing wire, cable, rubber tube and rubber strip etc. |
General Information | |
---|---|
Features |
|
Uses |
|
Appearance |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density | 1.08 to 1.18 | g/cm³ | ASTM D1505 |
Hardness | Nominal Value | Unit | Test Method |
---|---|---|---|
Durometer Hardness (Shore A) | 37 to 43 | ASTM D2240 |
Elastomers | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Set | < 7 | % | ASTM D412 |
Tensile Strength (Yield) | > 6.50 | MPa | ASTM D412 |
Tensile Elongation (Break) | > 400 | % | ASTM D412 |
Tear Strength | > 16.0 | kN/m | ASTM D624 |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Colorite SF 6011SF | Colorite Polymers | PVC, Unspecified | Colorite SF |
Formolene® 6600A | Formosa Plastics Corporation, U.S.A. | PP Impact Copolymer | Formolene® |
Hanwha Total PE B221B | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | HDPE | Hanwha Total PE |
Kumho KNB 40M | Korea Kumho Petrochemical Co., Ltd. | NBR | Kumho KNB |
Hifax CB 1160 G1 C11460 | LyondellBasell Industries | PP Copolymer | Hifax |