Order Products : sales@su-jiao.com
CERTENE™ HPB-0760
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MX9dlS_CERTENE-HPB-0760.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HPB-0760 is a certified prime Phillips Process designed for BLOW MOLDING of containers for packaging of non-aggressive chemicals. HPB-0760 features low to medium swell, easy processability in conventional continuous extrusion equipment, good ESCR, good Impact strength, high Stiffness, improved Barrier, and low Odor and Taste. HPB-0760 applications include small to medium size thin wall bottle for milk, water and juices, wide mouth containers for body powders, and extrusion of sheet and profiles. HPB-0760 processing temperature is 140 to 165°C., with mold 10 to 30°C. HPB-0760 complies with FDA regulation 21CFR 177.1520 (c) 3.1(a) + 3.2(a) and with most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.70 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance 1(50°C, 1.75 mm, 100% Igepal, Compression Molded, F50) | 15.0 | hr | ASTM D1693B |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Compression Molded) | 31.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Compression Molded) | 710 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(Compression Molded) | 1450 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength (Compression Molded) | 189 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 80.0 | °C | ASTM D648 |
| Brittleness Temperature | < -75.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 128 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 10.0 to 30.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 140 to 165 | °C |
| Note Message | |
|---|---|
| 1 . | Notched bent strip |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Resirene 6110 | Resirene, S.A. de C.V. | PS (HIPS) | Resirene |
| VAMPLUB PEEK NEAT RESIN | Vamp Tech | PEEK | VAMPLUB |
| Favorite A180 | Favorite Plastics | PE, Unspecified | Favorite |
| LG ABS HI140 | LG Chem Ltd. | ABS | LG ABS |
| ICORENE® 1506 | A. Schulman Europe | XLPE | ICORENE® |
