Order Products : sales@su-jiao.com
ASI POLYPROPYLENE 1930-01
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | ASI POLYPROPYLENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MWFe66_ASI-POLYPROPYLENE-1930-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PP 1930 is an automotive recognized copolymer polypropylene for use on interior trim applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 34 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 26.0 | MPa | ASTM D638 |
| Flexural Modulus - Tangent 2 | 1200 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 75 | J/m | ASTM D256 |
| Instrumented Dart Impact (-30°C) | 20.0 | J | GM 9300P |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 104 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultradur® B 4040 G6 High Speed | BASF Corporation | PBT+PET | Ultradur® |
| Braskem PE LH-218 | Braskem | LLDPE | Braskem PE |
| Generic PET - Glass\Mineral | Generic | PET | Generic |
| Iupiace® EHM103R | Mitsubishi Engineering-Plastics Corp | PPE+PS | Iupiace® |
| Plaskon S-7 | Cookson Electronics - Semiconductor Products | Epoxy | Plaskon |
