Order Products : sales@su-jiao.com
RTP 700A HS
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MKZ3BA_RTP-700A-HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.918 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 210 | MPa | ASTM D638 |
| Tensile Strength | 10.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 550 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 210 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 370 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 40.0 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 177 to 227 | °C | |
| Middle Temperature | 177 to 227 | °C | |
| Front Temperature | 177 to 227 | °C | |
| Mold Temperature | 21.0 to 66.0 | °C | |
| Injection Pressure | 69.0 to 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Miramid® S3CHW | BASF Leuna GmbH | Nylon 66 | Miramid® |
| ACLAR® 22C (5 mil) | Honeywell | PCTFE | ACLAR® |
| AMTOPP TL18 | Inteplast Group | PP, Unspecified | AMTOPP |
| Forprene® 6NE901A65 | SO.F.TER. SPA | TPV | Forprene® |
| LNP™ THERMOTUF™ V1000 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOTUF™ |
