Order Products : sales@su-jiao.com
ASTABLEND™ MNM21EF
| Category: | ABS+Nylon , Acrylonitrile Butadiene Styrene + Nylon |
| Manufacturer: | Marplex Australia Pty. Ltd. |
| Trademark: | ASTABLEND™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MK4izp_ASTABLEND-MNM21EF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ASTABLEND™ MNM21EF is an Acrylonitrile Butadiene Styrene + Nylon (ABS+Nylon) material. It is available in Asia Pacific, Latin America, or North America. Important attributes of ASTABLEND™ MNM21EF are:
Typical application of ASTABLEND™ MNM21EF: Automotive |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.07 | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) (240°C/10.0 kg) | 60.0 | cm³/10min | ISO 1133 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 1.3 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (4.00 mm) | 2100 | MPa | ISO 527-2/50 |
| Tensile Stress (4.00 mm) | 45.0 | MPa | ISO 527-2/50 |
| Tensile Strain | ISO 527-2/50 | ||
| Yield, 4.00 mm | 3.0 | % | |
| Break, 4.00 mm | 25 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30°C | 12 | kJ/m² | |
| 23°C | 70 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1 | |||
| 0.45 MPa, Unannealed | 88.0 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 63.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 110 | °C | ISO 306/B50 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 to 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 240 to 250 | °C | |
| Middle Temperature | 245 to 255 | °C | |
| Front Temperature | 250 to 260 | °C | |
| Processing (Melt) Temp | 245 to 265 | °C | |
| Mold Temperature | 50.0 to 70.0 | °C | |
| Injection Pressure | 60.0 to 120 | MPa | |
| Injection Rate | Moderate | ||
| Back Pressure | 0.100 to 0.500 | MPa | |
| Screw Speed | 40 to 50 | rpm | |
| Clamp Tonnage | 3.0 to 5.0 | kN/cm² |
| Note Message | |
|---|---|
| 1 . | 10.0 x 4.0 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Diamond ABS 3500 | Network Polymers, Inc. | ABS | Diamond ABS |
| Hifax EYG 382P C12716 | LyondellBasell Industries | PP Copolymer | Hifax |
| ESTADIENE 1030 HT V0 | Cossa Polimeri S.r.l. | ABS | ESTADIENE |
| Jampilen HP500L | Jam Polypropylene Company | PP Homopolymer | Jampilen |
| LNP™ LUBRICOMP™ RP003 compound | SABIC Innovative Plastics | Nylon 66 | LNP™ LUBRICOMP™ |
