Order Products : sales@su-jiao.com
VAMPLUB K 00U 2 TF E
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Vamp Tech |
| Trademark: | VAMPLUB |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MGe9y6_VAMPLUB-K-00U-2-TF-E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| For extrusion, PEEK unfilled with PTFE. |
| General Information | |
|---|---|
| Additive |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.33 | g/cm³ | ASTM D792 |
| Molding Shrinkage | ASTM D955 | ||
| Flow | 0.70 | % | |
| Across Flow | 1.2 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3200 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 80.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 50 | % | ASTM D638 |
| Coefficient of Friction | ASTM D1894 | ||
| Dynamic | 0.52 | ||
| Static | 0.42 | ||
| Wear Factor 1 | 128 | 10^-10 m³ h/N·m·h |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | 9.0 | kJ/m² | ISO 180/A |
| Unnotched Izod Impact Strength | No Break | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | > 300 | °C | ASTM D1525 2 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (3.20 mm) | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | Thrust Washer |
| 2 . | Loading 2 (50 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Fluoraz 797 | Greene, Tweed & Co. | PTFE | Fluoraz |
| Formolene® HB5202A | Formosa Plastics Corporation, U.S.A. | HDPE Copolymer | Formolene® |
| Kepital® TX-31 | Korea Engineering Plastics Co., Ltd | Acetal (POM) Copolymer | Kepital® |
| KW Plastics KWR105 | KW Plastics | HDPE | KW Plastics |
| Plaslube® PA6/6 GF27 SL2 | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
