Order Products : sales@su-jiao.com
ALCUDIA® LDPE CP-104
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | REPSOL |
| Trademark: | ALCUDIA® LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MEshQw_ALCUDIALDPECP104.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ALCUDIA® CP-104 is a natural and cross-linkable compound based on low density polyethylene, specifically designed to be cross-linked by organic peroxide. It contains a special antioxidant to guarantee thermal stability and causes minimum interference with the cross-linking process. The outstanding features of this grade are cleanliness, excellent thermal stability, good processing behaviour, excellent cross-linking efficiency at high speed and smooth surface finish. ALCUDIA® CP-104 is normally supplied in octabins, tankers and van-boxes. TYPICAL APPLICATIONS Medium voltage power cable insulation. Processing conditions of ALCUDIA® CP-104 are dependent on formulation and technique employed but it is noteworthy that this grade is suitable to use in a temperature range of 120°C - 130°C. ALCUDIA® CP-104 meets the following standards: ISO 1872 PE KHN 18D022; ASTM D 1248 I,A3 Grade E5. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 0.920 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.4 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 14.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 600 | % | ISO 527-2 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Retention of Mechanical Properties 1(100°C) | > 75 | % | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset 2(200°C) | % | IEC 60811-2-1 | |
| Vicat Softening Temperature | 91.0 | °C | ISO 306/A |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+16 | ohms·cm | ASTM D257 |
| Dielectric Strength 3 | > 22 | kV/mm | IEC 60243-1 |
| Dielectric Constant (1 MHz) | 2.30 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 5.0E-3 | ASTM D150 |
| Note Message | |
|---|---|
| 1 . | 10 days, 1.9% Peroxide |
| 2 . | 20 N/cm², 1.9% Peroxide |
| 3 . | 50 Hz |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| I. Stern 870E | I. STERN & CO. INC. | PS (HIPS) | I. Stern |
| Iupiace® LN23 | Mitsubishi Engineering-Plastics Corp | PPE+PS | Iupiace® |
| LNP™ STAT-LOY™ KX96821 compound | SABIC Innovative Plastics | Acetal (POM) Copolymer | LNP™ STAT-LOY™ |
| Sylvin 5145-70 CLEAR RED 6192 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Sylvin 8220-39 Natural | Sylvin Technologies Incorporated | PVC, Flexible | Sylvin |
