Order Products : sales@su-jiao.com
ADPOLY EM-510M
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Lotte Chemical Corporation |
| Trademark: | ADPOLY |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MAmCVG_ADPOLY-EM-510M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EM-510M is LLDPE based adhesive resin containing anhydride. This grade shows strong adhesion to PE, steel, and it has polyolefin-like properties. In addition, its processability is excellent. EM-510M is mainly intended for use as a adhesive resin in steel pipe coating and coupling agent for flame-retarded cable compound. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.920 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 0.40 to 1.2 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 51 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 12.7 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 500 | % | ASTM D638 |
| Flexural Modulus | 412 | MPa | ASTM D790 |
| Flexural Strength | 12.7 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 100 | °C | ASTM D1525 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Adhesion Strength | > 6.00 | kgf/2 cm | ASTM D903 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNO MUH M7205 | Techno Polymer Co, Ltd. | ABS | TECHNO MUH |
| Witcom POM-C 2A/2L1 | Witcom Engineering Plastics B.V. | Acetal (POM) Copolymer | Witcom POM-C |
| Caltex PP H710 | GS Caltex | PP Homopolymer | Caltex PP |
| KEBAFORM® C 270.0 | BARLOG plastics GmbH | Acetal (POM) Copolymer | KEBAFORM® C |
| OP - Acetal H-Acetal 20PTFE | Oxford Polymers | Acetal (POM) Homopolymer | OP - Acetal |
