Order Products : sales@su-jiao.com
Hipolyene 3152 MC
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | Zylog Plastalloys |
| Trademark: | Hipolyene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MAFFxm_Hipolyene-3152-MC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Hipolyene 3152 MC is a Thermoplastic Polyolefin Elastomer (TPO (POE)) material. It is available in Africa & Middle East or Europe. Typical application of Hipolyene 3152 MC: Automotive |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 29.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 75 | % | ASTM D638 |
| Flexural Modulus | 2350 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 18 | J/m | ASTM D256 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadrant EPP TIVAR® SuperPlus | Quadrant Engineering Plastic Products | UHMWPE | Quadrant EPP |
| TECHNIACE® TA-1500 | Nippon A&L Inc. | ABS+Nylon | TECHNIACE® |
| NYLOY® MG-0013N | Nytex Composites Co., Ltd. | Nylon 66 | NYLOY® |
| Caltex PP H240M | GS Caltex | PP Homopolymer | Caltex PP |
| Dynalloy™ OBC8000-T05 | PolyOne Corporation | TPE | Dynalloy™ |
