Order Products : sales@su-jiao.com
YUCLAIR® FT850
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | SK Global Chemical |
| Trademark: | YUCLAIR® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | M8tvun_YUCLAIR-FT850.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| YUCLAIR®FT850 is a linear low density polyethylene product,. It is available in North America, Europe or Asia Pacific. Typical application areas are: food contact applications. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 30 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 10.8 | MPa | ASTM D882 |
| TD : Yield | 10.8 | MPa | ASTM D882 |
| MD : Fracture | 45.1 | MPa | ASTM D882 |
| TD : Fracture | 42.2 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture | 800 | % | ASTM D882 |
| TD : Fracture | 830 | % | ASTM D882 |
| Spencer Impact | 0.588 | J | ASTM D3420 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | ASTM D1922 | ||
| MD | 166.7 | kN/m | ASTM D1922 |
| TD | 176.5 | kN/m | ASTM D1922 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -80.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 102 | °C | ASTM D1525 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze | 4.0 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 190 | °C | |
| Cylinder Zone 3 Temp. | 230 | °C | |
| Cylinder Zone 5 Temp. | 230 | °C | |
| Die Temperature | 230 | °C |
| Extrusion instructions |
|---|
| Film Extrusion Condition: Screw dia 50, Die width 450Die gap 0.8, Screw RPM 31, L/S 7 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Monprene® MP-1869 | Teknor Apex Company | TPE | Monprene® |
| Abstron AN 480 V2 | Bhansali Engineering Polymers Limited | ABS | Abstron |
| NuSil CV-2681-12 | NuSil Technology | Silicone | NuSil |
| Complet® LCF40-PA66 MT | PlastiComp, Inc. | Nylon 66 | Complet® |
| Favorite REG100 | Favorite Plastics | PE, Unspecified | Favorite |
