Order Products : sales@su-jiao.com
Moplen HP522H
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Moplen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | M0dvAy_MoplenHP522H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Moplen HP522H is the polypropylene homopolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen HP522H is a homopolymer particularly sui table for Metallizable BOPP film. Moplen HP522H resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 98 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 36.3 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 12 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1520 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 49 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 110 | °C | ASTM D648 |
| Vicat Softening Temperature | 155 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Toyolac® 100 322 | Toray Plastics (Malaysia) Sdn. Bhd. | ABS | Toyolac® |
| ALAMID® 6.6 PTFE 30 | LEIS Polytechnik - polymere Werkstoffe GmbH | Nylon 66 | ALAMID® |
| Hylon® N2013HLUV2 | Ravago Manufacturing Americas, LLC | Nylon 6 | Hylon® |
| LNP™ THERMOCOMP™ RF008H compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
| EPAMOULD 285A10T | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
