Order Products : sales@su-jiao.com
RTP 6003-75A UV
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LxzS1A_RTP-6003-75A-UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Bondable to PC/PMMA, PC/PBT - UV Stabilized |
| General Information | |
|---|---|
| Additive |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.80 - 1.4 | % | ASTM D955 |
| Moisture Content | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% strain, 3.18mm 1 | 3.10 | MPa | ASTM D412 |
| 100% strain, 3.18mm 2 | 3.45 | MPa | ASTM D412 |
| 300% strain, 3.18mm 3 | 4.83 | MPa | ASTM D412 |
| Tensile Strength 4(Break, 3.20 mm) | 6.21 | MPa | ASTM D412 |
| Tensile Elongation 5(Break) | 850 | % | ASTM D412 |
| Tear Strength 6 | 43.8 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 193 - 238 | °C | |
| Mold Temperature | 21.1 - 48.9 | °C | |
| Injection Pressure | 34.5 - 103 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | C mold, 510mm/min |
| 2 . | Mouth die C, 510mm/min |
| 3 . | C mold, 510mm/min |
| 4 . | C mold, 500 mm/min |
| 5 . | Mouth die C, 500 mm/min |
| 6 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| S&E Wire & Cable GA-3133S-CCUV | S&E Specialty Polymers, LLC | PVC, Unspecified | S&E Wire & Cable |
| Terralene® WF 5525 | FKuR Kunststoff GmbH | HDPE | Terralene® |
| Generic Phenolic - Flock | Generic | Phenolic | Generic |
| HiFill® PA6 0137 S2 | Techmer Engineered Solutions | Nylon 6 | HiFill® |
| LNP™ LUBRICOMP™ DEL36P compound | SABIC Innovative Plastics Europe | PC | LNP™ LUBRICOMP™ |
