Order Products : sales@su-jiao.com
ARCEL® 730 (1.75 pcf)
| Category: | PS+PE , Polystyrene + PE |
| Manufacturer: | NOVA Chemicals |
| Trademark: | ARCEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Lw8C6M_ARCEL-730-1-75-pcf-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ARCEL® 730 (1.75 pcf) is a Polystyrene + PE (PS+PE) material. It is available in North America for foam processing. Typical application of ARCEL® 730 (1.75 pcf): Foam |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.0280 | g/cm³ | ASTM D3575 |
| Particle Size - 98% | 0.800 to 1.70 | mm | |
| VOC Content | |||
| Pentane | 11 | % | |
| Plasticizer | 0.30 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Strain | 12 | % | ASTM C203 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Puncture | 198 | N | ASTM D3763 |
| Tear Strength - at Maximum Load | 2.2 | kN/m | ASTM D3575 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 0.389 | MPa | ASTM D3575 |
| Flexural Strength | ASTM C203 | ||
| -- | 0.350 | MPa | |
| 5.0% Strain | 0.299 | MPa | |
| Compressive Strength | ASTM D3575 | ||
| 10% Strain | 0.148 | MPa | |
| 25% Strain | 0.177 | MPa | |
| 50% Strain | 0.234 | MPa | |
| 75% Strain | 0.509 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| 4PROP® 9C22440 | 4Plas | PP Copolymer | 4PROP® |
| AKROTEK® PK-VM GF 30 TM natural (4955) | AKRO-PLASTIC GmbH | PK-Aliphatic | AKROTEK® |
| Bergamid™ B70 G/GK30 TM-Y UV NC | PolyOne Corporation | Nylon 6 | Bergamid™ |
| HTM® 556 | Cytec Industries Inc. | MAH-g | HTM® |
| Rotuba CAP CP800 (13% Plasticizer) | Rotuba Extruders, Inc. | CAP | Rotuba CAP |
