Order Products : sales@su-jiao.com

THERMOLAST® K TF7FMA (Series: FC/AD1)

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	KRAIBURG TPE
Trademark:	THERMOLAST® K
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	LvvQG7_THERMOLAST-K-TF7FMA-Series-FC-AD1-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

The FC/AD1 Series is your material solution for applications with food contact providing excellent adhesion to polar thermoplastics such as PC, ABS and PETG.

Typical applications

Function and design elements

Grip applications

Household articles

Packaging (for food and careproducts)

Razors

Seals

Toothbrushes

Toys

Material advantages

Applications with food contact

Code of Federal Regulations, Title 21 (CFR 21) "FDA"

Easy coloring (compounds in natural colors)

EN71/3

Excellent adhesion

Excellent processing behavior

Halogen-free

Regulation (EU) No. 10/2011

General Information
Features	Food Contact Acceptable Good Adhesion Good Colorability Good Processability Halogen Free
Uses	Food Packaging Household Goods Non-specific Food Applications Packaging Seals Toothbrush Handles Toys
Agency Ratings	EN 71-3 EU 10/2011 FDA Food Contact, Unspecified Rating
Appearance	Natural Color
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.10	g/cm³	ISO 1183

Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A)	67		ISO 7619

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(Yield)	5.00	MPa	ISO 37
Tensile Elongation ²(Break)	550	%	ISO 37
Tear Strength ³	18	kN/m	ISO 34-1

Additional Information	Nominal Value	Unit	Test Method
Adhesion to ABS	10.5	kN/m	Renault D41/1916
Adhesion to PC	14.0	kN/m	Renault D41/1916

Injection	Nominal Value	Unit
Drying Temperature	60.0 to 80.0	°C
Drying Time	2.0 to 4.0	hr
Rear Temperature	180	°C
Middle Temperature	210	°C
Front Temperature	240	°C
Mold Temperature	40.0 to 60.0	°C
Injection Pressure	20.0 to 100	MPa
Back Pressure	2.00 to 10.0	MPa

Note Message
1 .	Type S2, 200 mm/min
2 .	Type S2, 200 mm/min
3 .	Method Bb, Angle (Nicked)

Resin Grade	Manufacturer	Category	Trademark
Sanren F200A (1st-grade)	SINOPEC Shanghai Petrochemical Co. Ltd.	PP Homopolymer	Sanren
Ultra Purge HT	Moulds Plus International USA, Inc.	Proprietary	Ultra Purge
NaturePlast NP WF 004	NaturePlast	Biodeg Polymers	NaturePlast
Borealis PE FT5230	Borealis AG	LDPE	Borealis PE
3M™ Dyneon™ PTFE Compound TF 3236	3M Advanced Materials Division	PTFE	3M™ Dyneon™ PTFE Compound