Order Products : sales@su-jiao.com
Premier LB02018 - B
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Premier Polymers, LLC. |
| Trademark: | Premier |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LugASc_Premier-LB02018---B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Premier LB02018 is an LLDPE cast film resin that can also be used in a blend to improve processability and film properties. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D4883 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus | ASTM D882 | ||
| MD | 117 | MPa | |
| TD | 138 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 7.58 | MPa | |
| TD : Yield | 6.21 | MPa | |
| MD : Break | 62.1 | MPa | |
| TD : Break | 24.1 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 400 | % | |
| TD : Break | 850 | % | |
| Dart Drop Impact | < 50 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 20 | g | |
| TD | 450 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze | 1.7 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Small Boss RPVC05 | Tongxiang Small Boss Special Plastic Products Co., Ltd. | PVC, Rigid | Small Boss |
| Arnite® T08 200 | DSM Engineering Plastics | PBT | Arnite® |
| Daelim Po1y® LH-4100SK | DAELIM INDUSTRIAL CO., LTD. | HDPE | Daelim Po1y® |
| HiFill® PEI BK | Techmer Engineered Solutions | PEI | HiFill® |
| Omnix® 9050 | Solvay Specialty Polymers | HPPA | Omnix® |
