Order Products : sales@su-jiao.com
Andur 7-3 APLF/Curene® 442
| Category: | PUR-Ester/TDI , Polyurethane (Polyester, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LtDv9C_Andur-7-3-APLF-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 7-3 APLF is a polyester based liquid, toluene diisocyanate terminated prepolymer containing 0.1% or less free TDI monomer. An elastomer with a hardness of 70-75 Shore A is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442, other diamines or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.23 | g/cm³ | ASTM D1505 |
| Molding Shrinkage - Flow | 1.3 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 73 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 3.45 | MPa | ASTM D412 |
| 300% strain | 6.21 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 51.7 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 700 | % | ASTM D412 |
| Bayshore Resilience | 40 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 10 | min | |
| Demold Time (100°C) | 40 - 50 | min | |
| Post Cure Time (100°C) | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore A: 70 to 75Die C Tear, ASTM D1004: 400 pliAverage Split Tear, ASTM D1938: 200 pliStoichiometry Curative Level: 95%Mix Temperature: Andur 7-3 APLF: 170-190°F Curene 442: 230-250°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tarnoform® 300 UV | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| ADENE BCJBG | A.D. Compound spa | PP Copolymer | ADENE |
| ADEKA EH-5030S | Adeka Corporation | Epoxy | ADEKA |
| Flontech® FT-GL5-M5-1 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Dryflex® 500001 | ELASTO | SEBS | Dryflex® |
